HARNESS AS-PANEL 2096727 - Caterpillar

Explanation Of Illustration
1. Nozzle Number 1 is a good nozzle and can be used again.2. Nozzle Number 2 failed the "Cap/Bleed Screw Leakage" test. Install a new seal. Put the cap on the nozzle and test it again. 3. Nozzle Number 3 failed the "Plugged Orifice" test. The test was stopped at that point.4. Nozzle Number 4 failed the "Tip Leakage" test. The test was stopped at that point.5. Nozzle Number 5 failed the "VOP" test. The test was stopped at that point.6. Nozzle Number 6 had a tip that had been cleaned with a steel wire brush. No other tests were done after the "Visual Inspection".7. Nozzle Number 7 had a broken tip. No other tests were done after the "Visual Inspection".8. Nozzle Number 8 is a good nozzle and can be used again.