HARNESS AS-CHASSIS 2159442 - Caterpillar

2159442 HARNESS AS-CHASSIS Caterpillar parts 315C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2159442
215-9442
2159442

Weight: 18 pounds 8 kg.

Buy HARNESS AS-CHASSIS 2159442 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

215-9442 Wiring Harness for Caterpillar 315C Excavator - Direct Replacement, E315C Model (2159442)

$1,699.00

30 Aug 2025

CN: Engine Electric

215-9442 Wiring Harness for Caterpillar 315C Excavator - Direct Replacement, E315C Model (2159442)
LIUCHUANG Vehicle-Specific Fit: Engineered for Caterpillar 315C Excavator; guarantees perfect system compatibility || Direct Replacement: Matches part numbers 215-9442, 2159442; simplifies installation with no modifications needed || Robust Build: Crafted to meet rigorous OEM specifications; ensures long-lasting performance in demanding environments || Customizable Operation: Allows tailored programming; enhances excavator efficiency for specific tasks || Accurate Installation: Submit VIN nameplate photo after purchase; confirms precise fit for smooth operation

This part in 1 request: Show. This information for suppliers only!

#1188777 2159442

2023-08-19

Number on catalog scheme: 4

Caterpillar 2159442 Parts scheme HARNESS AS-CHASSIS

For full view, you need register

Compatible equipment models: 2159442:

EXCAVATOR 315C Caterpillar

Information:

Install O-ring seals (37) and backup ring (38) onto check valve (11).
Illustration 7 g01362691
Install O-ring seals (35) and backup ring (36) onto check valve (8).
Illustration 8 g01362689
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plug (34). Install retainer (33). Install spring (32). Install retainer (31). Install cover (30). Install bolts (29). Tighten bolts (29) to a torque of 12 3 N m (106 27 lb in).
Illustration 9 g01362680
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spool (28). Install plug (27). Install retainer (26). Install spring (25). Install retainer (24). Install cover (23). Install bolts (22). Tighten bolts (22) to a torque of 12 3 N m (106 27 lb in).
Illustration 10 g01362677
Install pistons (21).
Illustration 11 g01362672
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plug (20). Install spool (19). Install spring (18). Install ball (17). Install spring (16). Install plug (15). Tighten plug (15) to a torque of 5 1 N m (44 9 lb in).
Illustration 12 g01362657
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plug (14). Install solenoid (13). Tighten solenoid (13) to a torque of 5.5 1.5 N m (49 13 lb in). Install bolt (12). Tighten bolt (12) to a torque of 12 3 N m (106 27 lb in). Install check valve (11). Tighten check valve (11) to a torque of 80 15 N m (59 11 lb ft). Install solenoid (10). Tighten solenoid (10) to a torque of 5.5 1.5 N m (49 13 lb in). Install solenoid (9). Install bolt (9). Tighten bolt (9) to a torque of 12 3 N m (106 27 lb in). Install check valve (8). Tighten check valve (8) to a torque of 80 15 N m (59 11 lb ft). Install plug (7).
Illustration 13 g01362654
Install plug (6).
Illustration 14 g01362643
Install seal (5). Install control valve (4). Repeat this step for the remaining control valves.
Install seal (3). Install cover (2).
Illustration 15 g01362617
Install new nuts (1). Tighten nuts (1) in a crisscross pattern to a torque of 25 2.5 N m (221.3 22.1 lb in). Ensure that each nut (1) remains torqued to 25 2.5 N m (221.3 22.1 lb in). Note: Do not reuse nuts that have been torque turned. Replace nuts (1) when servicing the bank valve.
Tighten each nut (1) by an additional 90° 10° in the opposite crisscross pattern. End By:
Install the bank valve.