HARNESS AS-ENGINE 2248637 - Caterpillar

Illustration 99Install the swing bearing with the stamped mark (2) on the inner race relative to the carbody and the stopper (1).(3) Apply 5P-3931 Anti-Seize Compound to the surfaces in contact with the dowel pins.(4) Apply 5P-3931 Anti-Seize Compound to the threads of the bolts.Torque for 21 bolts ... 274 29 N m (202 21 lb ft)Turn the bolts 60° 5° further.(5) Torque for bolt ... 37 4 N m (27 3 lb ft)After the swing bearing has been installed, remove access cover (6) and add approximately 13 kg (28.7 lb) of 1P-0808 grease.(7) Torque for clamp ... 5.4 0.5 N m (4 1 ft)(8) Torque for bolts ... 37 4 N m (27 3 lb ft)(9) Torque for plug ... 60 6 N m (44 4 lb ft)(10) Apply 5P-3931 Anti-Seize Compound to the threads of the bolts.Torque for 17 bolts ... 274 29 N m (202 21 lb ft)Turn the bolts 60° 5° further.(11) Apply 5P-3931 Anti-Seize Compound to the threads of the bolts.Torque for 36 bolts ... 274 29 N m (202 21 lb ft)Turn the bolts 60° 5° further.Apply 1U-8846 Gasket Maker on surfaces (G). SMCS Code: 7063 Part No.: 114-1340 PIN: 3MR1-Up Part No.: 114-1341 PIN: 4MR1-Up
Illustration 100Install the swing bearing with the stamped mark (2) on the inner race relative to the carbody and the stopper (1).(3) Apply 5P-3931 Anti-Seize Compound to the surfaces in contact with the dowel pins.(4) Torque for bolts ... 37 4 N m (27 3 lb ft)(5) Torque for clamp ... 5.4 0.5 N m (4 1 ft)After the swing bearing has been installed, remove access cover (6) and add approximately 13 kg (28.7 lb) of 1P-0808 grease.(7) Torque for bolt ... 37 4 N m (27 3 lb ft)(8) Torque for plug ... 60 6 N m (44 4 lb ft)(9) Apply 5P-3931 Anti-Seize Compound to the threads of the bolts.Torque for 36 bolts ... 568 59 N m (420 44 lb ft)(10) Apply 5P-3931 Anti-Seize Compound to the threads of the bolts.Torque for 33 bolts ... 568 59 N m (420 44 lb ft)Apply 1U-8846 Gasket Maker on surfaces that are indicated by "G".