HARNESS AS-PLATFORM 2258002 - Caterpillar

Removal Procedure
Start By:
Remove the side grates, baffles, and the floor panels. For additional information, refer to Disassembly and Assembly, "Hood Side Panels and Side Doors - Remove" for the machine that is being serviced.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on the hose assemblies for installation purposes. Plug the hose assemblies. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Drain the implement hydraulic tank into a suitable container for storage or disposal. The implement hydraulic tank is located on the right side of the machine. The capacity of the implement hydraulic tank is 173 L (45 US gal).
Illustration 1 g00846690
Disconnect two hose assemblies (2) .
Remove six bolts (1) .
Illustration 2 g00846702
Use two people in order to remove implement hydraulic oil cooler (3). The weight of implement hydraulic oil cooler (3) is 50 kg (110 lb).