HARNESS AS-CHASSIS 2317288 - Caterpillar

Table 2
Linkage Bearings and Seals
View Bearing Part Number of Bearing Inside Diameter of Bearing Bearing Depth at Assembly Seal Part Number of Seal
A-A 5 3V-2333 89.19 0.02 mm (3.511 .001 inch) 10.0 1.0 mm (.39 .04 inch) 6 7K-9212
B-B 8 3G-9191 82.84 0.02 mm (3.261 .001 inch) 9.0 1.0 mm (0.35 0.04 inch) 9 7K-9210
D-D 17 5V-1386 114.62 0.02 mm (4.513 .001 inch) 9.5 1.0 mm (.37 .04 inch) 18 7K-9218
E-E 22 3G-8779 82.84 0.02 mm (3.261 .001 inch) 9.0 1.0 mm (0.35 0.04 inch) 28 7K-9210
F-F 15 4V-8674 76.48 0.02 mm (3.011 .001 inch) 9.0 1.0 mm (0.35 0.04 inch) 16 7K-9209
G-G 26 3G-8779 82.84 0.02 mm (3.261 .001 inch) 9.0 1.0 mm (0.35 0.04 inch) 27 7K-9210
H-H 24 5V-1874 63.74 0.02 mm (2.509 .001 inch) 9.5 1.0 mm (.37 .04 inch) 29 7K-9205
J-J 12 4V-8674 76.48 0.02 mm (3.011 .001 inch) 9.0 1.0 mm (0.35 0.04 inch) 13 7K-9209 Note: Lubricate all the pin bores with the lubricant that is being sealed. (14) Lubricate all the sealing lips with the lubricant that is being sealed. (30) Washers Thickness of one 5V-0353 Washer ... 1.6 mm (.06 inch)Thickness of one 5V-0354 Washer ... 3.0 mm (.12 inch)Install a minimum of one washer on each side of the lift arm. Maximum final clearance (30) ... 1.6 mm (.06 inch)