HARNESS AS-AXLE 2318191 - Caterpillar

Installation Procedure
Illustration 1 g01121119
Attach a suitable lifting device to piston pump (13). The weight of piston pump (13) is approximately 50 kg (110 lb). Raise piston pump (13) into position through the bottom of the machine. Install bolts (12).
Illustration 2 g01121080
Connect hose assemblies (9) and (11). Connect hose (10).
Illustration 3 g01425492
Bottom view of the pump
Connect hose assembly (7). Connect harness assembly (8). Close drain valve (6).
Illustration 4 g01121076
Install floorplate (4) and install bolts (5).
Illustration 5 g01119509
Install floor mat (1). Install plate (2) and bolts (3). Repeat for the other side. End By:
Install the rear drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Rear) - Remove and Install".