HARNESS AS-ENGINE 2334694 - Caterpillar

a maximum service life of the machine, complete a thorough walk-around inspection before you mount the machine and before you start the engine.Inspect the area around the machine and under the machine. Inspect the machine components and lines for defects. Look for loose bolts, trash buildup, oil, coolant, fuel, or exhaust leakage, broken parts, or worn parts.Note: Watch closely for leaks. If you observe a leak, find the source of the leak and correct the leak. If you suspect a leak or you observe a leak, check the fluid levels more frequently.Inspect the condition of the equipment and of the hydraulic components.Check the condition of the tires. Adjust the inflation pressure, if necessary.Check all of the oil levels, all of the coolant levels, and all of the fuel levels.Remove any trash buildup and debris. Make all necessary repairs before you operate the machine.Ensure that all covers and guards are securely attached.Adjust the mirrors for the correct rear view of the machine.Grease the work tool on a daily basis.Check the hood lamps and head lamps.Ensure that the rear view camera is working properly (if equipped).Daily, perform the procedures that are applicable to your machine. Refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule" “Every 10 Service Hours or Daily” category for the list of procedures.