2341183 HARNESS AS-SENSOR Caterpillar parts
365C, 365C L, 365C L MH, 374D L
Rating:
Alternative (cross code) number:
CA2341183
234-1183
2341183
CA2341183
234-1183
2341183
Weight: 0.37 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
234-1183 2341183 Wiring Harness Fits for CAT 365C 365CL Excavator Replace Parts
Dcmunxpas Part Name:Wiring Harness || Part Number:234-1183 2341183 || Application:Fits for CAT 365C 365CL Excavator
Dcmunxpas Part Name:Wiring Harness || Part Number:234-1183 2341183 || Application:Fits for CAT 365C 365CL Excavator
Replace Parts 234-1183 2341183 Wiring Harness Compatible for CAT 365C 365CL Excavator
GENERIC Part Name:Wiring Harness || Part Number:234-1183 2341183 || Application:Fits for CAT 365C 365CL Excavator
GENERIC Part Name:Wiring Harness || Part Number:234-1183 2341183 || Application:Fits for CAT 365C 365CL Excavator
234-1183 2341183 Wiring Harness Suitable for CAT E365C Excavator
TuneCrumph 【Part Name】:Wiring Harness || 【Part Number】:234-1183 2341183 || 【Application】:Suitable for CAT E365C Excavator || Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
TuneCrumph 【Part Name】:Wiring Harness || 【Part Number】:234-1183 2341183 || 【Application】:Suitable for CAT E365C Excavator || Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
This part in 2 request:
Show.
This information for suppliers only!
2024-04-19
2023-05-02
Number on catalog scheme:
40
For full view, you need register
Compatible equipment models: 2341183:
Information:
Installation Procedure
Table 1
Necessary Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
B 5P-3931 Anti-Seize Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
Illustration 1 g01315416
Apply Tooling (B) onto bolts (27). Install cover (28) and a new gasket. Install bolts (27) .
Illustration 2 g01315413
Apply Tooling (B) onto bolts (25). Install cover (26) and a new gasket. Install bolts (25). Apply Tooling (B) onto bolts (23). Install block (24) and a new gasket. Install bolts (23) .
Illustration 3 g01315412
Install adapter (22) and a new gasket. Install bracket (21). Apply Tooling (B) onto bolts (20). Install bolts (20). Install connector (19). Install hose assembly (18) .
Illustration 4 g01315409
Install a new gasket (20) .
Illustration 5 g01315403
Use Tooling (A) and a suitable lifting device in order to install turbocharger (12). The weight of turbocharger (12) is approximately 45 kg (100 lb).
Remove Tooling (A) .
Illustration 6 g01315407
Illustration 7 g01315405
Apply Tooling (B) onto bolt (16) and nut (15). Install bolt (16) and nut (15). Apply Tooling (B) onto bolts (14) and nuts (13). Install bolts (14) and nuts (13) .
Illustration 8 g01315402
Connect hose (11). Apply Tooling (B) onto bolts (9). Install a new gasket and connect elbow (10). Install bolts (9). Install elbow (8) .
Illustration 9 g01315298
Apply Tooling (B) onto bolts (6). Install bolts (6) in order to connect tube assembly (7) .
Illustration 10 g01315293
Connect hose assembly (5). Apply Tooling (B) to the threads of clamp (4). Connect clamp (4). Tighten clamp (4) to a torque of 12 2 N m (106 18 lb in). Tap clamp (4) on both sides with a suitable hammer. Tighten clamp (4) again to a torque of 12 2 N m (106 18 lb in). Connect hose assembly (3). Connect hose assembly (2) .
Illustration 11 g01315266
Use two people in order to install platform assembly (1). The weight of platform assembly (1) is approximately 23 kg (51 lb).
Refill the engine coolant. Refer to Operation and Maintenance Manual, "Capacities - Refill".End By: Remove the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Table 1
Necessary Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
B 5P-3931 Anti-Seize Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
Illustration 1 g01315416
Apply Tooling (B) onto bolts (27). Install cover (28) and a new gasket. Install bolts (27) .
Illustration 2 g01315413
Apply Tooling (B) onto bolts (25). Install cover (26) and a new gasket. Install bolts (25). Apply Tooling (B) onto bolts (23). Install block (24) and a new gasket. Install bolts (23) .
Illustration 3 g01315412
Install adapter (22) and a new gasket. Install bracket (21). Apply Tooling (B) onto bolts (20). Install bolts (20). Install connector (19). Install hose assembly (18) .
Illustration 4 g01315409
Install a new gasket (20) .
Illustration 5 g01315403
Use Tooling (A) and a suitable lifting device in order to install turbocharger (12). The weight of turbocharger (12) is approximately 45 kg (100 lb).
Remove Tooling (A) .
Illustration 6 g01315407
Illustration 7 g01315405
Apply Tooling (B) onto bolt (16) and nut (15). Install bolt (16) and nut (15). Apply Tooling (B) onto bolts (14) and nuts (13). Install bolts (14) and nuts (13) .
Illustration 8 g01315402
Connect hose (11). Apply Tooling (B) onto bolts (9). Install a new gasket and connect elbow (10). Install bolts (9). Install elbow (8) .
Illustration 9 g01315298
Apply Tooling (B) onto bolts (6). Install bolts (6) in order to connect tube assembly (7) .
Illustration 10 g01315293
Connect hose assembly (5). Apply Tooling (B) to the threads of clamp (4). Connect clamp (4). Tighten clamp (4) to a torque of 12 2 N m (106 18 lb in). Tap clamp (4) on both sides with a suitable hammer. Tighten clamp (4) again to a torque of 12 2 N m (106 18 lb in). Connect hose assembly (3). Connect hose assembly (2) .
Illustration 11 g01315266
Use two people in order to install platform assembly (1). The weight of platform assembly (1) is approximately 23 kg (51 lb).
Refill the engine coolant. Refer to Operation and Maintenance Manual, "Capacities - Refill".End By: Remove the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
311D LRR, 311F LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325D,...
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
3422893
HARNESS AS-SOLENOID
374D L
374D L
2756994
HARNESS AS-WIRING
374D L
374D L
3422953
HARNESS AS-SWITCH
374D L
374D L
3245715
HARNESS AS-FRONT
374D L
374D L
3245716
HARNESS AS-CONTROL
374D L
374D L
3422873
HARNESS AS-CHASSIS
374D L
374D L
3422905
HARNESS AS-WIRING
374D L
374D L
3886857
HARNESS AS-WIRING
374D L
374D L
3422882
HARNESS AS-CONTROL
374D L
374D L
3778259
HARNESS AS-CONTROL
374D L
374D L
365C, 365C L, 365C L MH
365C, 365C L, 365C L MH
365C, 365C L, 365C L MH
2553067
HARNESS AS-SENSOR
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
2382350
HARNESS AS-PLATFORM
345C, 345C L, 345C MH, 345D L
345C, 345C L, 345C MH, 345D L
2493545
HARNESS AS-PLATFORM
345C, 345C L
345C, 345C L
2500112
HARNESS AS-PLATFORM
365C, 365C L, 365C L MH
365C, 365C L, 365C L MH
2242862
HARNESS AS-BOX
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH
2510578
HARNESS AS-LIGHTING
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH
365C, 365C L, 365C L MH
365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L