2359006 HARNESS AS-HEATER & AIR COND Caterpillar parts
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
Rating:
Alternative (cross code) number:
CA2359006
235-9006
2359006
CA2359006
235-9006
2359006
Weight: 0.20 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 2359006:
Number on catalog scheme:
5
For full view, you need register
Information:
Illustration 1 g02631760
Before operating the machine, check monitoring system (2). Take action on any events that are displayed. Note: In order to provide maximum sound suppression, keep all doors closed and keep all windows closed.
Check the oil levels of the following systems and/or compartments: engine, transmission/torque converter, hoist/brake tank, rear axle and steering tank. Refer to the Maintenance Section for information on checking the oil levels.
Check the horn. Check the backup alarm. Check any other warning devices on the machine.
Check the operation of the steering and the brakes. Check the secondary brakes and check the secondary steering. Do not operate the machine if any discrepancies are found. Refer to Operation and Maintenance Manual, "Braking System - Test". Also refer to Operation and Maintenance Manual, "Secondary Steering - Test".
Frequently observe all messages, indicators, and gauges (1). All gauges should be at normal operating range. The system indicators, the action light, and the action alarm should be off.
Adjust the operator seat. Adjust the mirrors.
Do not allow a companion to ride on the machine unless the companion is seated within the Rollover Protective Structure (ROPS) or Falling Object Protection Structure (FOPS) with the seat belt fastened. The companion must have the seat belt fastened while the machine is in operation. The operator of the machine is responsible for the safety of the companion. Personal injury or death may occur if the companion is not restrained and protected.
Fasten the seat belt.
Lower the body. Place hoist control (4) in the FLOAT position.
Depress service brake control pedal (5). Note: Allow the engine to run for 45 seconds before depressing the service brake pedal or moving the transmission control out of PARK. This will allow the brake accumulators to fully charge in order to provide full braking capacity.
Move transmission control lever (3) from the PARK position to the desired direction and the desired gear. Note: Only operate the controls if the engine is running.
Release the service brake pedal and depress accelerator pedal (6). Preparing to Operate the Machine
In order to prevent injury, make sure that no one is working on the machine or near the machine. Keep the machine under control at all times in order to prevent injury.
Know the maximum height of the machine. Know the maximum width of the machine. Maintain proper clearance.
Only operate the machine if the engine is running.
Before the machine operates at a high speed, check the operation of the brake system and of the steering system. These systems should be checked while the machine maintains a low speed.
Make sure that the Automatic Retarder Control (ARC) and the manual retarder operate properly before you travel down a grade with a loaded machine. Test the retarder on a short grade before the machine is loaded.
Reduce engine speed when you are maneuvering in tight quarters or when you are driving over a rise. Reference: For further operating information, See Operation and Maintenance Manual, "Operation Information". Elevated Engine Idle
Low Temperature Warm-up
The low temperature warm-up feature will temporarily increase the low idle speed when the
Cat SIS web machinery list:
Parts harness Caterpillar catalog:
140M, 140M 2, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 330D, 330D FM, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, ...
120K, 120K 2, 12K, 12M, 140G, 140K, 140K 2, 140M, 160K, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 525C, 535C, 545...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, CX31-C13I, D8N, R1700G, RM-300, TH35-C11I, TH35-C13I, W345C MH
14M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, D8N, RM-300, TH35-C11I, TH35-C13I, W345C MH
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, CX31-C13I, D8N, W345C MH
120K, 120K 2, 12K, 140K, 140K 2, 160K, 324D, 324D FM, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 525C, 535C, 545C, 950H, 962H, AP-1055D, BG-2...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325D,...
324D, 324D L, 324D LN, 325D, 325D L, 329D, 329D L
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
320D, 323D L
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
3423040
HARNESS AS-SOLENOID
324D, 324D L, 325D L, 329D L
324D, 324D L, 325D L, 329D L
2677645
HARNESS AS-SOLENOID
324D, 324D LN, 325D, 325D L, 329D L
324D, 324D LN, 325D, 325D L, 329D L
2677961
HARNESS AS-SOLENOID
324D, 324D L, 325D L, 326D L, 329D L
324D, 324D L, 325D L, 326D L, 329D L
324D, 324D L, 325D, 325D L, 326D L, 329D, 329D L, 330D, 330D L, 336D, 336D L, 340D L
3640344
HARNESS AS-SENSOR
324D, 329D L
324D, 329D L
3778225
HARNESS AS-WIRING
324D, 325D L, 329D L
324D, 325D L, 329D L
2917560
HARNESS AS-CHASSIS
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 330D, 3...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 330D, 3...
2678073
HARNESS AS-CHASSIS
320D, 320D LRR, 324D, 325D, 325D L, 328D LCR, 330D, 330D L
320D, 320D LRR, 324D, 325D, 325D L, 328D LCR, 330D, 330D L
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...