AVSPARE.COM
parts catalog

HARNESS AS. 2369779 - Caterpillar


2369779 HARNESS AS. Caterpillar parts
Rating:
26
Alternative (cross code) number:
CA2369779
236-9779
2369779
Caterpillar 2369779 HARNESS AS.
Weight: 0.18 pounds 0 kg.

Buy HARNESS AS. 2369779 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 7 g00852076
Illustration 8 g00852075
Top View
Use two persons in order to install firewall (24) .
Connect electrical connector (23) .
Illustration 9 g00852073
Install bracket assembly (21) .
Install two bolts (22) and the washers.
Illustration 10 g00852071
Install wire ties (20) .
Illustration 11 g00852069
Connect tube assembly (18) .
Connect electrical connector (19) .
Illustration 12 g00852066
Connect electrical connector (17) .
Illustration 13 g00852064
Install sensor (16) .
Install two bolts (15) and the washers.
Illustration 14 g00852063
Install side panel (14) .
Install three bolts (12) and the washers.
Install two bolts (13) and the washers.
Illustration 15 g00852057
Install two bolts (11) and the washers.
Illustration 16 g00852051
Typical Example
Attach Tooling (A) to bracket assembly (9), as shown.
Attach a suitable hoist and lifting chains to Tooling (A), as shown.
Use the hoist in order to install bracket assembly (9). The weight of bracket assembly (9) is 55 kg (120 lb).
Install four bolts (10) and the washers.Note: Refer to Steps 26 and 27 for machines with the following serial number: 7MZ.
Illustration 17 g00852016
Close swingout ladder (6) .
Install pin (7) and the cotter pin to swingout ladder (6) .Note: Refer to Steps 28 and 29 for machines with the following serial number: BRL.
Illustration 18 g00852032
Close swingout ladder (6) .
Close latch (8) .
Illustration 19 g00852012
Install pin (5) to swingout ladder (6) .
Repeat steps 18 through 30for the opposite side.
Illustration 20 g00852005
Install plate (4) .
Install bolt (3) and the washer. Repeat this procedure for the opposite side.
Connect hose assembly (2) and tighten two clamps (1) .End By:
Install the front and rear hood panels. Refer to Disassembly and Assembly, "Hood Panels (Front and Rear) - Install" for the machine that is being serviced.
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.


Parts harness Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.