HARNESS AS-SWITCH 2381497 - Caterpillar

Installation Of The New 291-7510 Wiring Harness
Illustration 1 g01276153
Existing Circuit Diagram
Illustration 2 g01276230
Circuit Diagram With The New Wiring Harness (1) 291-7510 Wiring Harness
Disconnect the former wiring harness.
Illustration 3 g01276601
View A-A From Illustration 5
Illustration 4 g01277318
Detail D From Illustration 3 Of The 70-Pin Connector On The Wire Side Of The ECM (G) Pin 48 (H) Pin 52 (J) Pin 53
Remove the 130-RD-14 wires from pin locations 48, 52, and 53.
Protect the three wires that were removed with vinyl tape. Secure the wires to the harness with cable straps.
Insert the side with the three wires of the 291-7510 Wiring Harness in pin location 48, 52, and 53.
Illustration 5 g01276373
Location Of The New Wiring Harness (1) 291-7510 Wiring Harness
Install the new 291-7510 Wiring Harness. Secure the new wiring harness with cable straps.
Illustration 6 g01276604
Detail B From Illustration 5 (1) 291-7510 Wiring Harness
Illustration 7 g01276606
Detail E From Illustration 6 Of The Circuit Breaker Panel (1) 291-7510 Wiring Harness
Illustration 8 g01276607
View C-C From Illustration 7 Of The Fuse Panel (F) Fuse for the power of the ADEM
Remove the 130-RD wire from the fuse for the power of the ADEM in the circuit breaker panel.
Protect the wire that was removed with vinyl tape. Secure the wire to the harness with cable straps.
Connect the single wire in the 291-7510 Wiring Harness to the fuse for the power of the ADEM in the circuit breaker panel.