HARNESS AS 2389662 - Caterpillar

1. Put the bucket in position as shown. 2. Remove bolts and retainers (1) and (2) that hold the bucket pins. 3. Remove bucket pins with tooling (A).4. Lift the boom until the stick and link are clear of the bucket. The weight of this bucket is 1100 lb. (495 kg).Install Bucket
1. Put the bucket in position under the stick. Lower the boom until the bore in the stick is in alignment with the bore in the bucket. 2. Put washer (1) in position on each side and install pin (2). Install tooling (A) to drive pin in if needed.3. Install the pin in the link. 4. Install retainers (3) and (4) that hold pins in place.