HARNESS AS-WIRING 2395523 - Caterpillar

62WThis instruction contains adaptability and installation information for the Remanufactured Engine given in the chart that follows.Do not perform any procedure, outlined in this publication, or order any parts until you read and understand the information contained within. Exchange of Parts
If the size of the work area permits, it will be beneficial to position the old engine and the new Remanufactured engine in a position where they are side-by-side. This will help when comparing the appearance and configuration of external parts, to determine what parts may need to be exchanged.The Remanufactured engine is built to the engine arrangement given in the previous charts. No modification or parts exchange is necessary if the part number of the Remanufactured Engine Arrangement is the same as the original engine arrangement it is replacing.Some modification or parts exchange may be necessary when the Remanufactured Engine Arrangement part number is different than the original engine arrangement part number.Use the reference literature indicated when it is necessary to exchange parts between the original engine and the Remanufactured engine.Although some parts on the Remanufactured engine may be different from those on the original engine, an exchange may not be necessary, depending upon the specific application.In some instances, it may be more advantageous to make minor modifications to the truck frame or engine mounting rails, rather than exchanging components between the Remanufactured engine and the original engine.Before installation of the Remanufactured engine, make sure the transmission mounting group, flywheel housing, flywheel, and vibration damper/crankshaft pulley are compatible with your application.Each Remanufactured engine is rated at a specific horsepower (kW) at a specific rpm. The recommended Remanufactured engine that is to be installed will not necessarily have the same exact horsepower (kW) and rpm rating as the original engine that it is replacing. The horsepower (kW) and rpm setting of the recommended Remanufactured engine can, however, be adjusted to the same horsepower (kW) and rpm as the original engine.
The horsepower (kW) and rpm setting of the original engine was set to match the driveline, cooling system, etc., of your specific truck. If these settings on the Remanufactured engine are different from those of the original engine, make the adjustments needed to give the Remanufactured engine the same horsepower (kW) and rpm setting as the original engine.
Always refer to the FUEL SETTING INFORMATION LIBRARY and/or the FUEL SETTING AND RELATED INFORMATION microfiche, form SBFY1113, before making any changes to the fuel setting.For maximum life of the Caterpillar Remanufactured engine, during the installation procedure be sure to check/inspect the following items for condition and/or adaptability in the specific application.Sound Suppression
If the original engine has sound suppression material on the valve covers, oil pan and/or cylinder block, it is sometimes necessary, by law, to install sound suppression material on a replacement engine.It may be necessary to clean the valve covers of the old engine and exchange them with the valve covers on the Remanufactured engine.Sound suppression that is on the old cylinder block and oil pan can possibly be