HARNESS AS-CONSOLE 2398335 - Caterpillar

b. Install O-ring seal (97) on seat (95). Put clean oil on the O-ring seal.c. Assemble spool (87). Install O-ring seal (97) on seat (95). Put clean oil on the O-ring seal. Install spring (94), ball (96), seat (95) and snap ring (98) in spool (87). d. Assemble spool (83). Install check (89), spring (92), retainer (90) and spiral snap ring (93) in spool (83). Install the ring on pin (88). Install pin (88) in spool (83). Install two spacers (91) in spool (83). e. Install spring (86) and spool (87) in valve body (76).f. Install spring (82), spool (83), cover (84) and two bolts (85) on valve body (76). g. Install O-ring seal (79) on filter (78). Put clean oil on the O-ring seal.h. Install filter screen (78) in rotary spool (75). Tighten the filter screen to a torque of 6.1 0.7 N m (54 5 lb in).j. Install pin (81) in rotary spool (75).k. Position plug (77) in rotary spool (75). Align the holes in plug (77) and rotary spool (75), and install pin (80). Install the pin until it is 1.0 0.5 mm (.04 .02 in) below the surface of the rotary spool. l. Install spring (74), piston (73) and rotary spool (75) in valve body (76). m. Position plate (69) on manifold (72), and install five bolts (67). Tighten the bolts to a torque of 30 4 N m (22 3 lb ft).n. Position selector and pressure control valve group (49) on plate (69), and install thirteen bolts (66). Tighten the bolts to a torque of 28 7 N m (20 5 lb ft).o.