HARNESS 2406271 - Caterpillar

Illustration 10 g02800128The load sensing valve is located on the left side of the bank valve.The implement hydraulic system is a load sensing system that controls the operation of the bulldozer blade and the operation of the ripper.Drift Reduction Valve
Illustration 11 g02800129The drift reduction valve is located behind the rear right panel above the bank valve.The drift valve keeps the ripper from drifting down from a raised position.Implement Lift and Tilt Controls
Illustration 12 g02821776The implement lift and tilt controls are located in the implement joystick on the right side of the operator seat.The implement lift and tilt controls are used by the operator to control the lift and tilt functions of the blade. Moving the joystick back lifts the blade and moving forward lowers the blade. Moving the joystick to the right tilts the blade right and moving to the left tilts the blade to the left.Blade Angle Thumb Wheel
Illustration 13 g02822399The blade angle thumb wheel is located in the implement joystick on the right side of the operator seat.The blade angle thumb wheel is used by the operator to control the angle functions of the blade.Increment/Power Pitch Extend Switch
Illustration 14 g02822400The increment switch is located in the implement joystick on the right side of the operator seat.The increment switch is used by the operator to control the power pitch extend feature, and increment feature. This feature rolls the blade forward.Decrement/Power Pitch Retract Switch
Illustration 15 g02822401The decrement switch is located in the implement joystick on the right side of the operator seat.If equipped with power pitch, and grade control is disabled this button is used by the operator to control the power pitch retract feature.Blade Shake & Auto/Manual Switch
Illustration 16 g02822402The blade shake switch is located in the implement joystick on the right side of the operator seat.The blade shake switch is used by the operator to control the blade shake feature. If Accugrade is enabled this switch will engage or disengage Accugrade blade control.Implement Lockout Switch
Illustration 17 g02821856The implement lockout switch is located on the console to the right side of the operator seat.The implement lockout switch prevents movement of the implement system.Stable Blade Control Switch
Illustration 18 g02822403The stable blade control switch is located on the console to the right side of the operator seat.The stable blade control switch controls the stable blade control feature.Electronic Control Module
Illustration 19 g02821897The electronic control module is located on the machine right side, in the rear access panel.The electronic control module controls all electronic signals including solenoids, sensors, and switches for the implement system.Diverter Valve
Illustration 20 g02913778The diverter valve supplies oil to the tilt cylinder until the operator moves the controls for the pitch function.