HARNESS AS-MOTOR 2425203 - Caterpillar

Illustration 1 g03104504
Illustration 2 g03104501
Rear view
Table 1
Specification for 377-5905 Front Gear Gp
Item Qty Part Specification Description
1 1 6V-3348 O-Ring Seal During assembly, apply approved retention compound in order to secure.
2 1 278-4287 Pump Adapter After installation , bore of 127-5400 Bushing is 75.000 0.055 mm (2.9527 0.0022 inch).
Bushing must be flush with the pump adapter.
3 1 7N-5245 Pump Adapter After installation, bore of 127-5400 Bushing is 75.000 0.055 mm (2.9527 0.0022 inch).
Diameter of the new pump drive shaft (8) is 74.900 0.015 mm (2.9488 0.0006 inch).
4 1 8T-2153 Socket Setscrew Torque to 6 1 N m (53 9 lb in).
5 1 116-3242 Idler Gear As After installation, bore of 116-1365 Bushing is 105.970 0.010 mm (4.17204 0.0004 inch).
Installation depth is 2.3 0.5 mm (0.09 0.02 inch).
Diameter of the new shaft (10) is 105.88 0.02 mm (4.169 0.001 inch).
6 1 7C-3258 Thrust Washer Assembly Thickness is 7.00 0.15 mm (0.276 0.006 inch).
Protrusion of the dowel (B) is 4.5 0.5 mm (0.18 0.02 inch).
7 1 235-3546 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
9 2 259-4598 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.