HARNESS AS-CAB 2441169 - Caterpillar

Assembly Procedure
Note: The filter base comes in two sections: The first section is the base assembly (3) and the second section is the bracket assembly (2) .
Use the following procedure to assemble the oil filter base (3) .
Illustration 1 g00712185
Install seal washer (16) to plug (15) .
Install ball (18) and spring (17) to filter base (3) .
Install plug (15) .
Illustration 2 g00712186
Install plug (15) .
Illustration 3 g00712189
Install two plugs (14) to the oil filter base (3) .
Use the following procedure to assemble the bracket assembly.
Illustration 4 g00712080
Illustration 5 g00712145
Install seal washer (13) and locknut (10) to drain valve (11) .
Install drain valve (11) to bracket assembly (2) .
Tighten locknut (10) in order to lock drain valve (11) into position.
Illustration 6 g00712146
Install seal washer (12) to relief valve (9) .
Install relief valve (9) .
Illustration 7 g00712079
Install O-ring seal (8) to the oil sampling valve (7) .
Illustration 8 g00712078
Install oil sampling valve (7) .
Illustration 9 g00712077
Install cap (5) to the oil sampling valve.
Install two O-rings (6) to bracket assembly (2) .
Illustration 10 g00722593
Hold the bracket assembly (2) to the base assembly (3). Install three washers and three bolts (4) .
Illustration 11 g00722499
Install oil filter (1) hand tight.End By: Install the engine oil filter and filter bases. Refer to Disassembly and Assembly, "Engine Oil Filter and Oil Filter Base - Install" in this manual.