HARNESS AS-WIRING 2449599 - Caterpillar

Illustration 22 g01441599
Illustration 23 g01441602
Install walkway (2) to the truck with nine bolts (9) and nine washers (10) .
Illustration 24 g01441617
Secure walkway (1) to walkway (2) with four bolts (11) and four washers (12) .Note: Ensure that both walkway (1) and walkway (2) are flush with each other in order to avoid trip hazards.
Illustration 25 g01441395
Attach a suitable lifting device to fender (A) in order to lift fender (A) that was removed in Step 13 of the ""Removal of the Existing Parts"" section.Note: Fender (A) weighs approximately 29.4 kg (65 lb).
Install eight bolts (B) and eight washers (C) that were removed in Step 8 of the ""Removal of the Existing Parts"" section in order to secure fender (A) .
Illustration 26 g01441630
Install fender brace (D) with two bolts (E) and two washers (F) that were removed in Step 6 of the ""Removal of the Existing Parts"" section.
Illustration 27 g01443778
Right side view of fender (A)
Secure fender (A) with four bolts (G), eight washers (H), and four nuts (J) that were removed in Step 9. Reconnect all wiring harnesses for fender (A) .
Illustration 28 g01441719
Use a suitable lifting device in order to position handrail (13). Install twelve bolts (11), twelve washers (12), four bolts (15) and four washers (17) in order to secure handrail (13) .Note: Handrail (13) weighs approximately 25 kg (55 lb).Note: Step 27 is required for trucks that are equipped with the Dual Slope body.
Illustration 29 g01441721
Use a suitable lifting device in order to position handrail (14). Install twelve bolts (11), twelve washers (12), six bolts (16) and six washers (18) in order to secure handrail (14) .Note: Handrail (14) weighs approximately 47 kg (104 lb).Note: Step 28 is required for trucks that are equipped with the Wide Body.
Illustration 30 g01441735
Install handrail (19) with eight bolts (11) and eight washers (12) .Note: Step 29 is required for trucks that are equipped with the Dual Slope body.
Illustration 31 g01441745
Install handrail (20) with eight bolts (11), eight washers (12), four bolts (21) and four washers (22) .Note: Step 30 is required for trucks that are equipped with the Wide Body.
Illustration 32 g01441793
Install bracket (23) with eight bolts (24) and eight washers (22) .Note: Step 31 is required for trucks that are equipped with the Wide Body.
Illustration 33 g01441803
Install bracket (25) with two blocks (26), four bolts (27) and four washers (22) .Note: Step 32 is required for trucks that are equipped with the Wide Body.
Illustration 34 g01441804
Install mirror (29) with three bolts (28) and six washers (22) .Note: Step 33 is required for trucks that are equipped with the Wide Body.