2449641 HARNESS AS-WIRING Caterpillar parts
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C175-16, C32
Rating:
Alternative (cross code) number:
CA2449641
244-9641
2449641
CA2449641
244-9641
2449641
Weight: 0.02 pounds 0 kg.
GENERATOR SET, PETROLEUM ENGINE,
Compatible equipment models: 2449641:
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5J-7910 Bolt 1 Start By:
Remove the fan drive. Refer to Disassembly and Assembly , "Fan Drive - Remove". Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01398239
Remove bolts (1). Remove retainer (2).
Illustration 2 g01398238
Remove bearing cone (3). Remove spacer (4). Remove hub (5).
Illustration 3 g01398235
Illustration 4 g01398233
Reposition the hub, as shown. Remove lip seal (6). Remove bearing cone (3). Remove bearing cups (7).
Illustration 5 g01398332
Illustration 6 g01398228
Remove sleeve (11). Remove bolt (9) from shaft (10). Install Tooling (A) into shaft (10). Use a suitable press in order to remove shaft (10) from bracket (8).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5J-7910 Bolt 1 Start By:
Remove the fan drive. Refer to Disassembly and Assembly , "Fan Drive - Remove". Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01398239
Remove bolts (1). Remove retainer (2).
Illustration 2 g01398238
Remove bearing cone (3). Remove spacer (4). Remove hub (5).
Illustration 3 g01398235
Illustration 4 g01398233
Reposition the hub, as shown. Remove lip seal (6). Remove bearing cone (3). Remove bearing cups (7).
Illustration 5 g01398332
Illustration 6 g01398228
Remove sleeve (11). Remove bolt (9) from shaft (10). Install Tooling (A) into shaft (10). Use a suitable press in order to remove shaft (10) from bracket (8).
Cat SIS web machinery list:
Parts harness Caterpillar catalog:
5N9366
HARNESS AS-THERMOCOUPLE
3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3606, 3608, C-15, C-16, C18, D379, D379A, D379B, D398, D398A, D398B, D399,...
3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3606, 3608, C-15, C-16, C18, D379, D379A, D379B, D398, D398A, D398B, D399,...
1326469
HARNESS AS-WIRING
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797...
1214112
HARNESS AS-PANEL
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, PM3516
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, PM3516
2983804
HARNESS AS-BOX
3512C
3512C
2983793
HARNESS AS-BOX
3512C
3512C
2983792
HARNESS AS-BOX
3512C
3512C
3340817
HARNESS AS-SWITCH
C18, C32
C18, C32
3340816
HARNESS AS-SENSOR
C18, C32
C18, C32
2725936
HARNESS AS-ALARM
3406C, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C15, C175-16, C175-20, C18, C27, C32, C9, G3406, G3412
3406C, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C15, C175-16, C175-20, C18, C27, C32, C9, G3406, G3412
2983794
HARNESS AS-PANEL
3512C
3512C
2983791
HARNESS AS-POWER
3512C
3512C