HARNESS AS-ENGINE 2495061 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     311-1362     Vacuum Cap     1    
B     138-7573     Link Bracket     2    
Lower the blade to the ground.
Refer to Operation and Maintenance Manual, "System Pressure - Release".
Illustration 1 g02732239
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 138 kPa (20 psi). This procedure will pull a vacuum on the hydraulic system.
Illustration 2 g01430785
Loosen bolts (1). Remove bolts (2). Use two people in order to remove cover (3). The weight of cover (3) is approximately 32 kg (70 lb).
Illustration 3 g01430795
Disconnect tube assemblies (4) and tube assemblies (5) .
Disconnect harness assembly (6). Repeat this step for the opposite side.
Disconnect hose assemblies (7) and hose assemblies (8) .
Illustration 4 g01430802
Disconnect tube assemblies (9). Disconnect tube assembly (10). Disconnect tube assembly (11) .
Illustration 5 g01430845
Disconnect tube assembly (12) .
Illustration 6 g01430852
Attach Tooling (B) and a suitable lifting device onto bank valve (13). The weight of bank valve (13) is approximately 73 kg (160 lb).
Illustration 7 g01430857
Illustration 8 g01430860
Remove bolt (14), bolts (15), and bolts (16) .
Illustration 9 g01430859
Remove bank valve (13) .