HARNESS AS-CONTROL 2496615 - Caterpillar

1. Loosen hose clamp (1) and slide hose from breather. 2. Remove bolts (3) and (5) that hold the valve covers to the cylinder head. Remove the valve covers (2) and (4).Install Valve Covers
1. Install a new gasket for the valve covers if needed. Put 5H2471 Cement on the contact surfaces of the gasket and valve covers when a new gasket is installed.
3304 VALVE COVER
3306 VALVE COVER2. Put valve covers (3) and (4) in position on the cylinder head. Install the bolts that hold the valve cover in place. Tighten the bolts in number sequence to a torque of 8 2 lb.ft. (11 3 N m).3. Install hose (1) to connect the breather to the tube assembly with clamp (2).