2510188 HARNESS AS-CHASSIS Caterpillar parts
315C
Rating:
Alternative (cross code) number:
CA2510188
251-0188
2510188
CA2510188
251-0188
2510188
Weight: 17 pounds 7 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
#US Replacement Part for QuadBoss Solenoid Switch - SMU6097 Starterpart#2510188
Generic NOTE - Package included: 1 Set ONLY. Please check all (photos and model) and make sure it will compatible with your original one. || Manufacturer Part Number: SMU6097
Generic NOTE - Package included: 1 Set ONLY. Please check all (photos and model) and make sure it will compatible with your original one. || Manufacturer Part Number: SMU6097
#US Replacement part for Pentagram Chrome Vented Gas Cap Fuel Tank Right-hand Thread Fit Fits for Harley Fits for Softail tankpart#2510188
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one.
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one.
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 2510188:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 5900 - Start By:
Remove the fuel transfer pump.
Remove the engine oil pump.
Remove the water pump.
Remove the camshaft.
Remove the front gear group.
Remove the crankshaft position sensor.
Illustration 1 g01011130
Disconnect sensor (1).
Attach a suitable lifting device to the lifting bracket on the front of the engine. The weight of the engine is approximately 680 kg (1500 lb).
Remove front engine mount (4).
Loosen the oil pan bolts in order to allow the front of the oil pan to drop.
Remove bolts (2).
Remove front housing (3). Installation Procedure
Install front housing (3) in reverse order of removal.
Apply Tooling (A) in order to fill the space at the cylinder block, front housing (3), and the oil pan.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 5900 - Start By:
Remove the fuel transfer pump.
Remove the engine oil pump.
Remove the water pump.
Remove the camshaft.
Remove the front gear group.
Remove the crankshaft position sensor.
Illustration 1 g01011130
Disconnect sensor (1).
Attach a suitable lifting device to the lifting bracket on the front of the engine. The weight of the engine is approximately 680 kg (1500 lb).
Remove front engine mount (4).
Loosen the oil pan bolts in order to allow the front of the oil pan to drop.
Remove bolts (2).
Remove front housing (3). Installation Procedure
Install front housing (3) in reverse order of removal.
Apply Tooling (A) in order to fill the space at the cylinder block, front housing (3), and the oil pan.
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
2992926
HARNESS AS
315C
315C
2992927
HARNESS AS
315C
315C
2992928
HARNESS AS
315C
315C
2130897
HARNESS AS
315C
315C
2704087
HARNESS AS-CONSOLE
304, 305
304, 305
312C L