HARNESS AS-SENSOR 2535306 - Caterpillar

Illustration 5 g00470297
Table 3
Relays    
Number    Description    
44     Left turn signal for the machine    
45     Horn    
46     Right turn signal for the machine    
47     Lights for the rocker switches    
48     Front flood lights    
49     Roading lights    
50     Front windshield wiper    
51     Rear flood light    
52     Partial flood light    
53     Front windshield wiper    
54     Radio    
55     Enable for the front windshield wiper    
56     Work lamps for the trailer    
57     Belt tensioner switch    
58     Air Conditioner    
59     Low beam headlamps    
60     Enable for the turn signals    
61     High beam headlamps    
62     Indicator for the hazard warning lights    Relays for the Right Side Console
The fuse panel for the right side console is located on the front of the right side console near the floor.
Illustration 6 g00470305
Table 4
Relays    
Number    Description    
63     Suspension seat    
64     Three-point hitch    
65     Subwoofer    
66     Lamp test    
Illustration 7 g00411732
Circuit Breakers
Illustration 8 g00470307
Table 5
Circuit Breakers    
Number    Rating    Description    
67     20 Amp     Running lamps (1)    
68     20 Amp     Engine start switch    
( 1 ) Reset the circuit breaker by turning off the lights. Then, turn on the lights. If the lights flicker or the circuit breakers reset continuously, there could be an overload condition.Auxiliary Circuit Breakers and Main Circuit Breakers
Illustration 9 g00470972
The circuit breakers are located on the air conditoner box on the left side of the machine.
Table 6
Circuit Breakers    
Number    Rating    Description    
69     150 Amp     Main    
70     80 Amp     Auxiliary    Circuit Breaker for the Engine and Relay for the Engine
Illustration 10 g00470973
A 20 ampere circuit breaker (71) is located on the right frame rail. The circuit breaker will automatically reset after an overload condition. Engine relay (72) is located near the circuit breaker.