2594971 HARNESS AS-SENSOR Caterpillar parts
320C, 320C L, 320D
Rating:
Alternative (cross code) number:
CA2594971
259-4971
2594971
CA2594971
259-4971
2594971
Weight: 0.06 pounds 0 kg.
EXCAVATOR,
Number on catalog scheme:
3
For full view, you need register
Information:
Installation Procedure
Personal injury can result from contact with refrigerant.This system is under pressure at all times, engine running or not. Heat should never be applied to a charged system. Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Before any checks of the air conditioning and heating system are made, move the machine to a smooth horizontal surface. Lower all implements to the ground. Make sure the transmission is in neutral or park and that the parking brake is engaged. Keep all other personnel either away from the machine or where they can be seen.
Illustration 1 g00574008
Position a suitable lifting device around the condenser (1). Install condenser (1) to the cab assembly. The approximate weight of the condenser (1) is 27.3 kg (60 lb).
Install four bolts (4) and washers in order to install the condenser (1) to the cab assembly.
Install bolts, washers and clips (5) in order to install conduit (3) to condenser (1).
Connect conduit (2) and conduit (3) to condenser (1).
Evacuate the air conditioning system. Refer to Air Conditioning and Heating, Testing and Adjusting, SENR5664, "Refrigerant System - Evacuate".
Charge the air conditioning system. Refer to Air Conditioning and Heating, Testing and Adjusting, SENR5664, "Refrigerant System - Charge". End By:
Remove truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Personal injury can result from contact with refrigerant.This system is under pressure at all times, engine running or not. Heat should never be applied to a charged system. Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Before any checks of the air conditioning and heating system are made, move the machine to a smooth horizontal surface. Lower all implements to the ground. Make sure the transmission is in neutral or park and that the parking brake is engaged. Keep all other personnel either away from the machine or where they can be seen.
Illustration 1 g00574008
Position a suitable lifting device around the condenser (1). Install condenser (1) to the cab assembly. The approximate weight of the condenser (1) is 27.3 kg (60 lb).
Install four bolts (4) and washers in order to install the condenser (1) to the cab assembly.
Install bolts, washers and clips (5) in order to install conduit (3) to condenser (1).
Connect conduit (2) and conduit (3) to condenser (1).
Evacuate the air conditioning system. Refer to Air Conditioning and Heating, Testing and Adjusting, SENR5664, "Refrigerant System - Evacuate".
Charge the air conditioning system. Refer to Air Conditioning and Heating, Testing and Adjusting, SENR5664, "Refrigerant System - Charge". End By:
Remove truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
2041629
HARNESS AS-WIRING
320C, 322C, 325C, 330C L
320C, 322C, 325C, 330C L
2041630
HARNESS AS-PANEL
320C, 322C
320C, 322C
1974317
HARNESS AS
320C
320C
1933374
HARNESS AS
320C
320C
1709314
HARNESS AS
320C
320C