HARNESS AS 2595349 - Caterpillar

Apply 1U-8801 Rust Preventative coating to all rod ends, pins, locknuts, adjusting threads, and pin holes. Drive on stamped end of bearings only. Bulkhead nuts must clear seals without damage to seals.(2) Torque for cable assembly nuts ... 38 7 N m (28 5 lb ft)(4) Torque for one nut ... 12 4 N m (9 3 lb ft)(5) Torque for one nut ... 12 4 N m (9 3 lb ft)(6) Torque for one nut ... 12 4 N m (9 3 lb ft)(9) Torque for one nut ... 8 3 N m (71 26 lb in)Adjustment Procedure
1. Put ports (B) in valve group (3) in the blocked position, (B1).2. Put attachment diverter valve control handle (1) in the down position, [(A), (front attachment position)].3. Loosen nut (9) and adjust rod end (8) until pin (7) can be freely installed through the rod end and lever.4. Tighten nut (9) to correct torque.