HARNESS AS-POWER 2613401 - Caterpillar

Removal Procedure
Start By:
Remove the right side engine enclosure. Refer to Disassembly and Assembly, "Sound Suppression (Engine Enclosure) - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01384226
Illustration 2 g01384228
Loosen clamps (3) and disconnect hose (4). Remove bolts (1) and bolts (5). Remove bonnet (2) .
Remove bolts (6). Separate and remove oil cooler (9) from bonnet (8). Remove gasket (7) .