2677645 HARNESS AS-SOLENOID Caterpillar parts
324D, 324D LN, 325D, 325D L, 329D L
Rating:
Alternative (cross code) number:
CA2677645
267-7645
2677645
CA2677645
267-7645
2677645
Weight: 1 pounds 0 kg.
EXCAVATOR,
This part in 2 request:
Show.
This information for suppliers only!
2023-08-03
2018-02-21
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Personal injury can result from hot oil or hot components.At operating temperature, oil is hot and under pressure. Hot oil can cause burns.Remove the fill cap only when the engine is stopped, and the fill cap is cool enough to touch with your bare hand.Do not allow hot oil or components to contact skin.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: The oil filter element can be replaced without removing the entire oil filter assembly.
Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure Release".
Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Tank Oil - Change - Hoist and Brake System".
Drain the oil filter base into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Oil Filter - Replace - Brake Cooling Filter".
Illustration 1 g02144026
Remove bolts (1).
Illustration 2 g02144027
Disconnect harness assembly (2) and hose assemblies (3). Attach Tooling (A) and a suitable lifting device onto oil filter assembly (4). The weight of oil filter assembly (4) is approximately 64 kg (140 lb). Remove bolts (5) and remove oil filter assembly (4). Disassembly Procedure
Illustration 3 g02144054
Remove cover (1). Remove O-ring seal (2). Remove filter element (3).
Illustration 4 g02144055
Remove pressure sensor (4). Assembly Procedure
Illustration 5 g02144055
Install pressure sensor (4). Tighten pressure sensor (4) to a torque of 6.18 1.41 N m (55 13 lb in).
Illustration 6 g02144054
Install filter element (3). Install O-ring seal (2). Install cover (1). Installation Procedure
Install oil filter assembly (4) in the reverse order.
Personal injury can result from hot oil or hot components.At operating temperature, oil is hot and under pressure. Hot oil can cause burns.Remove the fill cap only when the engine is stopped, and the fill cap is cool enough to touch with your bare hand.Do not allow hot oil or components to contact skin.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: The oil filter element can be replaced without removing the entire oil filter assembly.
Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure Release".
Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Tank Oil - Change - Hoist and Brake System".
Drain the oil filter base into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Oil Filter - Replace - Brake Cooling Filter".
Illustration 1 g02144026
Remove bolts (1).
Illustration 2 g02144027
Disconnect harness assembly (2) and hose assemblies (3). Attach Tooling (A) and a suitable lifting device onto oil filter assembly (4). The weight of oil filter assembly (4) is approximately 64 kg (140 lb). Remove bolts (5) and remove oil filter assembly (4). Disassembly Procedure
Illustration 3 g02144054
Remove cover (1). Remove O-ring seal (2). Remove filter element (3).
Illustration 4 g02144055
Remove pressure sensor (4). Assembly Procedure
Illustration 5 g02144055
Install pressure sensor (4). Tighten pressure sensor (4) to a torque of 6.18 1.41 N m (55 13 lb in).
Illustration 6 g02144054
Install filter element (3). Install O-ring seal (2). Install cover (1). Installation Procedure
Install oil filter assembly (4) in the reverse order.
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
120K, 12K, 140G, 140K, 140K 2, 140M, 160K, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 525C, 535C, 545C, 573, 584, 815B, 95...
120K, 120K 2, 12K, 12M, 140G, 140K, 140K 2, 140M, 160K, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 525C, 535C, 545...
12M, 140M, 324D, 324D FM LL, 324D L, 325D, 325D L, 329D, 329D L, 584, 950H, 962H, AP-755, M325D L MH, M325D MH
120K, 120K 2, 12K, 140K, 140K 2, 160K, 324D, 324D FM, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 525C, 535C, 545C, 950H, 962H, AP-1055D, BG-2...
2382479
HARNESS AS-WIRING
311D LRR, 312D, 312D L, 312D2, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D2 L, 324D, 324D L, 325D L, 326D L, 328D LCR, ...
311D LRR, 312D, 312D L, 312D2, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D2 L, 324D, 324D L, 325D L, 326D L, 328D LCR, ...
311D LRR, 312D, 312D L, 312D2 L, 313D, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 323D L, 323D LN, 323D SA, 324D, 324D FM, 32...
2381597
HARNESS AS-SWITCH
320D, 320D FM, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329...
320D, 320D FM, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329...
2359006
HARNESS AS-HEATER & AIR COND
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
2677961
HARNESS AS-SOLENOID
324D, 324D L, 325D L, 326D L, 329D L
324D, 324D L, 325D L, 326D L, 329D L
324D, 324D L, 325D, 325D L, 326D L, 329D, 329D L, 330D, 330D L, 336D, 336D L, 340D L
3640344
HARNESS AS-SENSOR
324D, 329D L
324D, 329D L
3778225
HARNESS AS-WIRING
324D, 325D L, 329D L
324D, 325D L, 329D L
2510457
HARNESS AS-PUMP
324D, 325D L, 329D L
324D, 325D L, 329D L
2678024
HARNESS AS-WIRING
320D, 323D L, 323D LN, 323D SA, 324D, 324D L, 325D L, 329D L, 330D L, 336D, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L
320D, 323D L, 323D LN, 323D SA, 324D, 324D L, 325D L, 329D L, 330D L, 336D, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L
2917560
HARNESS AS-CHASSIS
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 330D, 3...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 330D, 3...
2678073
HARNESS AS-CHASSIS
320D, 320D LRR, 324D, 325D, 325D L, 328D LCR, 330D, 330D L
320D, 320D LRR, 324D, 325D, 325D L, 328D LCR, 330D, 330D L
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
2359006
HARNESS AS-HEATER & AIR COND
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
3423040
HARNESS AS-SOLENOID
324D, 324D L, 325D L, 329D L
324D, 324D L, 325D L, 329D L