HARNESS AS-VALVE 2678019 - Caterpillar

Illustration 5 g02052873
Unlock alternate exit window during machine operations.
Move the lever to the left to the UNLOCK position. Move the lever to the right to the LOCK position. Exit through the opening.For more information, refer to Operation and Maintenance Manual, "Alternate Exit".Data Privacy (4)This message is located on the window on the right side of the cab.
Illustration 6 g01418953The Product Link System is a satellite communication device that transmits information regarding the machine back to Caterpillar and Caterpillar dealers and customers. All logged events and diagnostic codes that are available to the Caterpillar Electronic Technician (ET) on the CAT data link can be sent to the satellite. Information can also be sent to the Product Link System. The information is used to improve Caterpillar products and Caterpillar services.Refer to Operation and Maintenance Manual, "Product Link" for more information.Machine Security System (5)This message is located on the bottom of the cab door.
Illustration 7 g00951606This machine may be equipped with a security system. Read the Operation and Maintenance Manual before you operate the machine.Refer to Operation and Maintenance Manual, "Machine Security System" for more information.Alternate Exit (6)If equipped, this message is located on the front window of the cab in the upper left-hand corner.
Illustration 8 g02052913Move the lever to the right in order to unlock the front window. Raise the window into the storage position. Exit through the opening.Refer to Operation and Maintenance Manual, "Alternate Exit" for further information.Counterweight (7)This message is located on the counterweight.
Illustration 9 g01435946Do not tighten the counterweight mounting bolts without checking the retainer pin for the proper position.Refer to Operation and Maintenance Manual, "Counterweight Removal and Installation" for more information.Radial Air Cleaner (8)This message is located on the cover of the air cleaner.
Illustration 10 g01134494 In order to avoid engine damage, replace old filters with radial seal air filters.The location and design of the gasket for the radial seal air filter is critical to the proper operation of the air cleaner element. Use only Caterpillar replacements.Refer to Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace".No Step (9)This message is located on the engine hood, the hydraulic tank, and the fuel tank. This message is also located on the left side of the machine behind the cab.
Illustration 11 g00911158Diesel Fuel Requirements (10)This message is located by the fuel tank and also by the fuel transfer pump (if equipped).
Illustration 12 g03676438Refer to Operation and Maintenance Manual, "Lubricant Viscosities".Hydraulic Oil (11)This message is located on the hydraulic tank.
Illustration 13 g03621736Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for more information about the oil.Biodegradable Hydraulic Oil (12)This message is located on the hydraulic tank.
Illustration 14 g03621717Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for more information about the oil.Engine Oil Requirements (13)This message is located next to the fast fill (if equipped).
Illustration 15 g03676437Refer to Operation and Maintenance Manual, "Lubricant Viscosities".Adjustable Gauge Undercarriage Frame (14)This message is located on the front of the track frames of the machine.
Illustration 16 g03403282Reference: Refer to the Operation and Maintenance Manual, "Adjustable Gauge Undercarriage Frame" for the procedure in order to adjust