AVSPARE.COM
parts catalog

HARNESS AS-TRANSMISSION 2680208 - Caterpillar


2680208 HARNESS AS-TRANSMISSION Caterpillar parts D10T, D9T
Rating:
52
Alternative (cross code) number:
CA2680208
268-0208
2680208
Caterpillar 2680208 HARNESS AS-TRANSMISSION
Weight: 0.70 pounds 0 kg.

Buy HARNESS AS-TRANSMISSION 2680208 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 2680208:

TRACK-TYPE TRACTOR  D10T   D9T   Caterpillar
Number on catalog scheme: 1
  For full view, you need register

Information:

2. Remove fan guards (1) from the radiator.3. Loosen the bolts that hold the alternator in position to remove the tension on vee belts (2). Remove vee belts (2) from the engine. 4. Fasten a hoist to the fan drive as shown. Remove bolts that hold the fan drive bracket to the timing gear cover.5. Remove the fan and fan drive as a unit. The weight of the unit is 55 lb. (25 kg).Install Fan And Fan Drive
1. Fasten a hoist to the fan and fan drive. Put the unit in position on the timing gear cover and install the bolts to hold it. 2. Install vee belts (2) on the pulleys. Make an adjustment of the vee belts. See INSTALL ALTERNATOR.3. Install fan guards (1) on the radiator.4. Put clean grease in the fan drive.5. Install the hood and side panel assemblies on the machine.Disassemble Fan And Fan Drive
start by:a) remove fan and fan drive 1. Remove the bolts and remove fan assembly (1) from the adapter. 2. Remove the bolts and nuts to remove adapter (2) and the O-ring seal from the hub. 3. Remove bolts (3), the lock and washer. 4. Use a soft faced hammer to push hub (5) away from bearing (4). Remove bearing (4) by hand. 5. Remove pulley (8) and the hub from bracket assembly (6) as a unit. Remove the inner bearing and spacer from the hub.6. Remove spacer (7) from bracket assembly (6). 7. Remove hub (5) from pulley (8). 8. Remove seal (9) from hub (5).Assemble Fan And Fan Drive
1. Use tool group (A) to install the seal even with the end of hub (1) with the lip of the seal toward the outside as shown. 2. Install spacer (3) on bracket assembly (4) with the chamfer toward pulley (2).3. Install hub (1) in pulley (2). Put multipurpose type grease on the lip of the seal and install the pulley and hub on bracket assembly (4). 4. Install the inner bearing and spacer (5) in the hub. 5. Fill the area between the bearings in the hub with multipurpose type grease. Install outer bearing (6) in the hub. 6. Install washer (8), the lock and bolts to hold the bearing in position.7. Put adapter (7) in position on the hub and install the bolts and nuts to hold the parts together. 8. Put fan assembly (9) in position on the adapter and install the bolts and lockwashers that hold it.end by:a) install fan and fan drive

Caterpillar parts catalog:

Caterpillar parts catalog
DV232 Track Type Tractor NJH00001-UP (MACHINE) POWERED BY C18 Engine
D9T Track-Type Tractor RJS00001-UP (MACHINE) POWERED BY C18 Engine
D10T TRACK-TYPE TRACTOR RJG00001-UP (MACHINE) POWERED BY C27 Engine
D9T TRACK-TYPE TRACTOR TWG00001-UP (MACHINE) POWERED BY C18 Engine


Parts harness Caterpillar catalog:

1212844 HARNESS ASSEMBLY-CRANK
561N, 572R II, 583T, 587T, 953C, 963C, 973C, D10R, D10T, D11N, D11R, D5N, D6K2, D6K2 LGP, D6N, D6N LGP, D6N OEM, D6R, D6R II, D6R III, D6R STD, D6T, D7E, D7R II, D7R XR, D8R, D8R II, D8T, D9R, D9T, PL...
2137012 HARNESS AS-CONSOLE
572R II, 587T, D10T, D11T, PL87
3122959 HARNESS AS-CAB
D10T, D11T, D8T, D9T
2161319 HARNESS AS-DASH
D10T, D11T, D8T, D9T
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.