HARNESS AS. 2697691 - Caterpillar

Illustration 11 g01064079
Remove rotating group (32) from pump housing (27). Remove pump shaft (33) with the rotating group.
Illustration 12 g01064080
Remove swashplate bearings (34) from pump housing (27) .
Illustration 13 g01064081
Rotate pump housing (27). Use Tooling (A) in order to remove retaining ring (35) from pump housing (27) .
Illustration 14 g01064083
Remove oil seal (36) from pump housing (27) .
Illustration 15 g01064085
Remove bearing cup (37) from pump housing (27) .
Illustration 16 g01064096
Remove shaft assembly (33) from rotating group (32) .
Illustration 17 g01064086
Use a suitable press and Tooling (B) to remove bearing cone (38) from shaft assembly (33) .
Illustration 18 g01064087
Remove swashplate cradle (39) from rotating group (32) .
Illustration 19 g01064088
Remove piston assemblies (40) from barrel (41) .Note: Place a mark on the piston assemblies and the barrel. The pistons must be returned to the original position.
Illustration 20 g01064089
Remove piston assemblies (40) from retaining plate (42) .
Illustration 21 g01064091
Remove guide (43) from barrel (41) .
Illustration 22 g01064092
Illustration 23 g01064093
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Use a suitable press and Tooling (C) to compress the spring in barrel (41) .
Use Tooling (A) to remove retaining ring (44) from the barrel (41) .
Remove spring (45), plate (46), and pressure pins (47) from the barrel.
Illustration 24 g01064095
If necessary, remove stop (48) from swashplate cradle (39) .