2756916 HARNESS AS-SOLENOID Caterpillar parts
320D LN, 323D L, 323D LN
Rating:
Alternative (cross code) number:
CA2756916
275-6916
2756916
CA2756916
275-6916
2756916
Weight: 0.46 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 2756916:
Number on catalog scheme:
30
For full view, you need register
Information:
Illustration 1 g01902837
(1) Pump drive
(2) Gear pump for the rear axle motor drive
(3) Relief valve and unloader valve
Illustration 2 g01902844
(4) Gear pump for the differential sump scavenge
(5) Gear pump for lubrication for the differential
(6) Gear pump for the final drive lubrication
(7) Gear motor for the rear axle pump drive Gear motor (7) for the rear axle pump drive drives the following three pump sections:
Gear pump (4) for the differential sump scavenge
Gear pump (5) for the lubrication of the differential
Gear pump (6) for the final drive lubrication Gear motor (7) for the rear axle pump drive is located on the front of the rear axle housing. Gear motor (7) for the rear axle pump drive is driven by gear pump (2). Gear pump (2) is shown in Illustration 1. Gear pump (2) is on the end of the brake actuation pump section, which is driven by pump drive (1). Gear motor (7) for the rear axle pump drive drives gear pump sections (6), (5), and (4). These three pump sections pump oil to the final drives and to the differential.Gear motor (7) for the rear axle pump drive is controlled by the relief valve and unloader valve (3), shown in Illustration 1. Unloader valve (3) will divert the oil that turns gear motor (7) for the rear axle pump drive when the temperature of the oil in the rear axle is below 57 °C (135 °F). Also, oil will be diverted if the machine has been stationary for more than five minutes with the engine running. If the truck begins to move and the temperature of the rear axle oil is above −4 °C (25 °F), unloader valve (3) will be deactivated. Oil will then drive gear motor (7) for the rear axle pump drive. If the temperature of the rear axle oil is below −4 °C (25 °F), unloader valve (3) will be activated. Oil will then stop flowing to gear motor (7) for the rear axle pump drive, and pump sections (6), (5), and (4) will not pump oil to the final drives and to the differential.Pressure relief valve (3) is shown in Illustration 1. Pressure relief valve (3) limits pressure to 13800 kPa (2000 psi). Drive pump pressure for the gear motor can be measured at a pressure tap (not shown) that is located on gear pump (2).
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
323D L, 323D LN
2381595
HARNESS AS-SWITCH
320D, 320D FM, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329...
320D, 320D FM, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329...
2677628
HARNESS AS-LIGHTING
320D, 320D FM, 320D L, 320D2, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L
320D, 320D FM, 320D L, 320D2, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L
2677626
HARNESS AS-LIGHTING
320D, 320D FM, 320D L, 323D L, 323D LN, 323D SA, 323D2 L
320D, 320D FM, 320D L, 323D L, 323D LN, 323D SA, 323D2 L
2595327
HARNESS AS-LIGHTING
320D, 320D FM, 320D FM RR, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L
320D, 320D FM, 320D FM RR, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L
2595326
HARNESS AS-LIGHTING
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L
2747641
HARNESS AS-LIGHTING
323D L, 323D LN
323D L, 323D LN