HARNESS AS-WIRING 2856657 - Caterpillar

Illustration 1 g00411678
Service a new machine after Every 10 Service Hours only within the initial 100 service hours.After the initial 100 service hours of operation, service the boom, the stick, and the bucket linkage after Every 50 Service Hours.Note: If the machine is operated under severe conditions that might cause abrasive material to enter the cylinder bearings or if the hydraulic hammer is used, service the boom, the stick, and the bucket linkage after Every 10 Service Hours.Wipe all fittings before you apply lubricant.
Illustration 2 g00411720
Apply lubricant through the fitting at the base of the boom.
Illustration 3 g00411721
Apply lubricant through the fittings at the base of the boom cylinder.
Illustration 4 g00411838
Apply lubricant through fitting (1) and through fitting (2) . These fittings are located on the link.
Apply lubricant through fitting (3) . This fitting is located on the rod end of the bucket cylinder.
Apply lubricant through fitting (4) . This fitting is located on the stick.
Apply lubricant through fitting (5) and through fitting (6) . These fittings are located on the power link.
Illustration 5 g00411858
Apply lubricant through fitting (7) . This fitting is located on the rod end of the boom cylinder.
Apply lubricant through fitting (8) . This fitting is located on the head end of the stick cylinder.
Illustration 6 g00411859
Apply lubricant through fitting (9) . This fitting is located at the junction of the boom and the stick.
Illustration 7 g00411878
Apply lubricant through fitting (10) . This fitting is located on the rod end of the stick cylinder.
Apply lubricant through fitting (11) . This fitting is located at the junction of the boom and the stick.
Apply lubricant through fitting (12) . This fitting is located on the head end of the bucket cylinder.