HARNESS AS-PLATFORM 2906721 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The rear face of the cover and the front face of the housing must be clean.
Illustration 1 g01151669
Position front cover (5) and the gasket on the engine.
Install bolts (3).
Install bolts (4). Remove the support from the attachment for the accessory drive.
Illustration 2 g01151545
Position support assembly (2) and install bolts (1). End By:
Install the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit Injector Hydraulic Pump - Install".
Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".