HARNESS AS-WIRING 2906801 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-3931     Anti-Seize Compound     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01148173
Illustration 2 g01145002
Position the gasket on the exhaust manifold.
Apply Tooling (A) to the threads of the exhaust manifold studs.Note: Install turbocharger (5) in the original location and the original orientation that was noted in the removal procedure.
Attach a suitable lifting device to turbocharger (5) . The weight of turbocharger (5) is approximately 45 kg (100 lb). Position turbocharger (5) on the exhaust manifold.
Install nuts (3) and tighten to a torque of 55 9 N m (41 7 lb ft).
Connect tube assemblies (1) and tube assembly (4) .
Install tube assembly (2) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".