2917731 HARNESS AS-LIGHTING Caterpillar parts
315D L, 316E L, 318D2 L, 318E L
Rating:
Alternative (cross code) number:
CA2917731
291-7731
2917731
CA2917731
291-7731
2917731
Weight: 0.23 pounds 0 kg.
EXCAVATOR,
Number on catalog scheme:
5
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 333-0758 Valve Spring Compressor 1 Start By:
Remove the cylinder head.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01206603
Illustration 2 g01207146
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) into the hole for the electronic unit injector. Refer to Illustration 2.
Illustration 3 g01851274
Install the plate of Tooling (A) onto the valve springs. Refer to Illustration 3. Install the nut onto the stud. Tighten the nut in order to compress valve springs (2). Remove retainer locks (1) .
Illustration 4 g01298522
Remove Tooling (A). Remove rotocoil (3), outer spring (4), and inner spring (5) .
Repeat Steps 1 through 3 for the remaining valve springs.Installation Procedure
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install valve springs (2) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 333-0758 Valve Spring Compressor 1 Start By:
Remove the cylinder head.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01206603
Illustration 2 g01207146
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) into the hole for the electronic unit injector. Refer to Illustration 2.
Illustration 3 g01851274
Install the plate of Tooling (A) onto the valve springs. Refer to Illustration 3. Install the nut onto the stud. Tighten the nut in order to compress valve springs (2). Remove retainer locks (1) .
Illustration 4 g01298522
Remove Tooling (A). Remove rotocoil (3), outer spring (4), and inner spring (5) .
Repeat Steps 1 through 3 for the remaining valve springs.Installation Procedure
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install valve springs (2) in the reverse order of removal.
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
2992841
HARNESS AS-SOLENOID
311D LRR, 312D, 312D L, 315D L, 319D L, 345D, 345D L, 349D, 349D L
311D LRR, 312D, 312D L, 315D L, 319D L, 345D, 345D L, 349D, 349D L
311D LRR, 312D, 312D L, 312D2 L, 313D, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 323D L, 323D LN, 323D SA, 324D, 324D FM, 32...
2677708
HARNESS AS-WIRING
312D, 312D L, 315D L, 319D
312D, 312D L, 315D L, 319D
2992694
HARNESS AS-CONTROL
315D L, 316E L, 318E L, 319D L, 319D LN
315D L, 316E L, 318E L, 319D L, 319D LN
2677703
HARNESS AS-VALVE
315D L, 318D2 L, 319D, 319D L, 319D LN
315D L, 318D2 L, 319D, 319D L, 319D LN
3423034
HARNESS AS-CHASSIS
315D L, 319D L, 319D LN
315D L, 319D L, 319D LN
3508487
HARNESS AS-CAB
315D L, 319D L, 319D LN
315D L, 319D L, 319D LN
3690279
HARNESS AS-VALVE
316E L, 318E L
316E L, 318E L
3690281
HARNESS AS-CAB
316E L, 320E, 320E RR
316E L, 320E, 320E RR
2917746
HARNESS AS-LIGHTING
315D L, 316E L, 318D L, 318D2 L, 318E L
315D L, 316E L, 318D L, 318D2 L, 318E L
2917700
HARNESS AS-WIRING
311D LRR, 312D, 315D L, 319D L, 320D, 320D LRR, 320D RR, 323D L, 324D, 325D L, 329D L, 330D L, 336D, 345C
311D LRR, 312D, 315D L, 319D L, 320D, 320D LRR, 320D RR, 323D L, 324D, 325D L, 329D L, 330D L, 336D, 345C
3191276
HARNESS AS-CHASSIS
315D L, 318D L, 319D L
315D L, 318D L, 319D L
315D L, 319D, 319D L
3068539
HARNESS AS-PUMP
315D L, 319D
315D L, 319D
2992786
HARNESS AS-CHASSIS
315D L, 319D
315D L, 319D
311D LRR, 312D, 312D L, 315D L, 319D L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 323D L
2992837
HARNESS AS-VALVE
315D L, 319D L, 319D LN
315D L, 319D L, 319D LN
2992838
HARNESS AS-VALVE
315D L, 318D2 L, 319D L, 319D LN
315D L, 318D2 L, 319D L, 319D LN
2677694
HARNESS AS-CONTROL
311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 319D L, 319D LN
311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 319D L, 319D LN
2382479
HARNESS AS-WIRING
311D LRR, 312D, 312D L, 312D2, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D2 L, 324D, 324D L, 325D L, 326D L, 328D LCR, ...
311D LRR, 312D, 312D L, 312D2, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D2 L, 324D, 324D L, 325D L, 326D L, 328D LCR, ...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325D,...