HARNESS AS-VALVE 2917856 - Caterpillar

Illustration 1 g01856874
(X) Guide studs
(Y) Short fastener Tighten the fasteners in the sequence that is shown in illustration 1. Torque for the fasteners ... 22 N m (16 lb ft)
Illustration 2 g01857014Remove the guide studs. Install the fasteners (27), (28), (29) and (30).Tighten the fastener in the sequence that is shown in illustration 2. Torque for the fasteners ... 22 N m (16 lb ft)Tighten the oil drain plug to the following torque. ... 34 N m (25 lb ft)Tighten the oil level switch (if equipped) to the following torque. ... 34 N m (25 lb ft)Refer to the Disassembly and Assembly, "Engine Oil Pan" for the correct procedure to install the engine oil pan.The Cast Iron Oil Pan
Illustration 3 g01397669
Tightening sequence
Tighten the fasteners in the sequence that is shown in illustration 3 to the following torque. ... 22 N m (16 lb ft)Tighten the oil drain plug to the following torque. ... 34 N m (25 lb ft)Tighten the oil level switch (if equipped) to the following torque. ... 34 N m (25 lb ft)