HARNESS ASSEM. 2N3875 - Caterpillar

2N3875 HARNESS ASSEM. Caterpillar parts 3160

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2N3875
2N-3875
2N3875

Weight: 4 pounds 2 kg.

Buy HARNESS ASSEM. 2N3875 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE,

Compatible equipment models: 2N3875:

GEN SET ENGINE 3160 Caterpillar

Number on catalog scheme: None

Caterpillar 2N3875 Parts scheme HARNESS ASSEM.

For full view, you need register

Information:

Removal Procedure
Start By:
Remove the bottom guard for the transmission. Refer to Disassembly and Assembly, "Bottom Guard (Transmission) - Remove".
Remove the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Implement, Pilot, Steering, Brake) - Remove".
Remove the transmission oil pump. Refer to Disassembly and Assembly, "Transmission Oil Pump - Remove". Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g00586263
Remove bolts (1) and disconnect tube assembly (2).
Illustration 2 g00586264
Remove bolts (3) and cover assembly (4).
Illustration 3 g00586267
Remove bolts (5) and shaft (6) from cover assembly (4).
Illustration 4 g00586269
Remove retaining ring (7), gear (8), and bearing (9) from cover assembly (4).
Illustration 5 g00586271
Use a suitable press to remove bearing (9) from gear (8).
Illustration 6 g00586273
Remove bolts (10) and housing (11).
Illustration 7 g00586276
Remove bolts (12) from housing (11) and shaft (13).
Illustration 8 g00586279
Illustration 9 g00586280
Use a suitable press to remove shaft (13), gear (14), spacer (15), and bearing race (16) from housing (11).
Illustration 10 g00586283
Remove retaining ring (17), gear (18), and bearing (19) from housing (11).
Illustration 11 g00586285
Use a suitable press to remove bearing (19) from gear (18).