HARNESS AS-SCREED 3079146 - Caterpillar

Illustration 1 g02785096
Table 1
Specification for 333-3077 Swing Gear and Bearing Gp
Item Qty Part Number Specification Description
Position “S” that is on inner race (8) relative to the carbody (1) and bearing stopper (2). Refer to Illustration 1 for the correct orientation of the races.
3 4 8T-4136 Bolt Apply blue Loctite 242 to the threads.
Torque to 20 2 N m (177 18 lb in).
4 - - Apply 1U-8846 Gasket Sealant to the mating surfaces of the swing gear and bearing group and the upper frame assembly.
5 1 095-1299 Dowel Apply Loctite C5A Copper Anti-Seize to the holes of the dowel.
6 34 7X-2555 Bolt Apply Loctite C5A Copper Anti-Seize to the threads. Omit the bolt seats and surfaces of the washers.
Torque to 270 40 N m (199 30 lb ft).
7 - - Apply 1U-8846 Gasket Sealant to the mating surfaces of the swing gear and bearing group and the carbody assembly.
9 38 8T-0357 Bolt Apply Loctite C5A Copper Anti-Seize to the threads. Omit the bolt seats and surfaces of the washers.
Torque to 270 40 N m (199 30 lb ft).