HARNESS AS-CONTROL 3092710 - Caterpillar

Illustration 1 g03408786
Typical example
Remove outlet connection (1) on the return fuel outlet of the fuel injection pump.
Remove timing device closing plug (2) to allow the unit to vent whilst draining.Note: If a small amount of fuel is expelled from the fuel injection pump in step 3 and step 4, the advance device end plate (4) may be removed to allow complete drainage of the fuel injection pump.
If necessary, remove screws (3). Remove advance device end plate (4) .
Drain the fuel for the fuel injection pump. Ensure as much fuel has been drained from the fuel injection pump as possible.
If necessary, install advance device end plate (4). Install screws (3) to advance device end plate (4). Tighten screws (3) finger tight.
Install timing device closing plug (2). Tighten timing device closing plug (2) finger tight.
Install outlet connection (1) on the return fuel outlet of the fuel injection pump. Tighten outlet connection (1) finger tight.
Plug or cap all open ports with suitable plugs or caps.
Wrap the fuel injection pump in a sealed compatible plastic bag. Ensure that the fuel injection pump is contained within a strong outer packaging with non-conductive, compatible inner cushioning material to prevent movement of the part in the box.Note: Ensure that all supporting documentation reference to the part is contained within the package, but not within the sealed compatible plastic bag containing the part.
Securely seal the box or outer packaging.