HARNESS AS-ENGINE 3102330 - Caterpillar

Trip Points for the Monitoring System
The monitoring system determines the level of action that is taken by the ECM in response to a condition that can damage the engine. When any of these conditions occur, the appropriate event code will trip.Table 1 contains the conditions that are monitored and the default trip points for each condition. Each condition has an associated parameter. The settings for each parameter can be viewed with the Caterpillar Electronic Technician (ET). The trip points for some of the parameters may be adjustable with Cat ET.
Table 1
Trip Points for the Monitoring System    
Condition    Action    Delay Time in Seconds    Trip Point    Default State    
Min Max Default    Min    Max    Default    
E096 High Fuel Pressure     Warning     N/A     N/A     8     N/A     N/A    
758 kPa (110 psi)     On (1)    
E198 Low Fuel Pressure     Warning     N/A     N/A     10     N/A     N/A    
350 kPa (50.8 psi)     On (1)    
Derate N/A     N/A     2     N/A     N/A         Off    
E360 Low Engine Oil Pressure
    Warning     N/A     N/A     8     N/A     N/A     (3)     On (1)    
Shutdown N/A     N/A     4     N/A     N/A     (3)     On (1)    
E361 High Engine Coolant Temperature
    Warning     N/A     N/A     10    
85 °C (185 °F)    
108 °C (226 °F)    
108 °C (226 °F)     On (1)    
Derate 1     120     10    
86 °C (187 °F)    
111 °C (232°F)    
111 °C (232°F)     On (1)    
Shutdown 1     120     10    
87 °C (188.6000 °F)    
111 °C (232°F)    
111 °C (232°F)     Off    
E362 Engine Overspeed     Warning     N/A     N/A     0.6     N/A     N/A     2600 rpm     On (1)    
Derate N/A     N/A     0.6     N/A     N/A     2800 rpm     On (1)    
E390 Fuel Filter Resriction     Warning     N/A     N/A     3600     N/A     N/A     Open     On (1)    
Derate N/A     N/A     14400     N/A     N/A     Open     On (1)    
E539 High Engine Inlet Air Temperature     Warning     N/A     N/A     8     N/A     N/A    
90 °C (194°F)     On (1)    
Derate N/A     N/A     8     N/A     N/A    
110 °C (230°F)     On (1)    
( 1 ) This event is permanently enabled. The event cannot be disabled.
( 3 ) Map dependent value