HARNESS AS-LIGHTING 3105374 - Caterpillar

Secure the lift cylinders to the radiator guard using the following steps when blade is not attached.1. Remove one bolt from each side.2. Align the lift cylinder brackets with the tapped hole in face of guard.3. Install the bolts.Check the travel route for overpass clearances. Make sure there will be adequate clearance, if the machine being transported is equipped with ROPS, cab or canopy.Basic machine shipping specifications are listed below. Standard Machine Low Ground Pressure
Remove ice, snow or other slippery material from shipping machine and loading dock, before loading the machine.
Always block the trailer or rail car wheels before loading the machine.Move the transmission selector levers to NEUTRAL.Move the steering lever to NO STEER.Engage the parking brake.Stop the engine.Turn the start switch and the disconnect switch key to OFF and remove the keys.Install tie-downs at several locations, and block tracks, front and rear.Cover the engine exhaust opening to prevent turbocharger windmilling in transit.Check state and local laws governing weight, width and length or load.Contact your Caterpillar dealer for shipping instructions for your machine.