HARNESS AS-POWER 3131356 - Caterpillar

start by:a) remove stick cylinder 1. Use tooling (A) as shown to remove the two stick cylinder bearings.2. Lower the temperature of the bearings. Use tooling (A) to pull the bearings into the stick. The bearings must not extend beyond the inside surface for the bore. Put a thin layer of 5P960 Multipurpose Type Grease on the bearings surface.end by:a) install stick cylinderRemove And Install The Boom Cylinder Bearings In The Boom
start by:a) remove boom cylinders The boom cylinder bearings in the boom must be damaged to be removed. Remove only if necessary.1. Remove two bearings (1) from each side of the boom. 2. Lower the temperature of the bearings. Use tooling (A) as shown to pull the bearings into the boom. The installed bearings must not extend beyond the inside surface of the bore. Put a thin layer of 5P960 Multipurpose Type Grease on the bearings surface.end by:a) install boom cylinders