3149553 HARNESS AS-PLATFORM Caterpillar parts
777G
Rating:
Alternative (cross code) number:
CA3149553
314-9553
3149553
CA3149553
314-9553
3149553
TRUCK,
Compatible equipment models: 3149553:
Number on catalog scheme:
4
For full view, you need register
Information:
Creating a Level Surface
A level surface requires an elevation and a name. Creating a level surface generates a design file. The design file then needs to be loaded for the system to give machine guidance.In order to create and load a level surface in the field, complete the following steps:
Illustration 1 g01247562
Press "Design: <Name>" from any guidance view. The Select Design File dialog appears. Refer to Illustration 1.
Illustration 2 g01247528
Press "New Level". The New Design: Level Surface dialog appears. Refer to Illustration 2.
Do one of the following actions:
Press the "Here" soft key in order to use the current elevation at the guidance point that has focus.
After you press the "Here" soft key, you can still use the arrow keys to change the values.
One of the "Blade: Left" or "Blade: Right" soft keys appears in the Level Surface Design dialog. This ensures that you know which blade tip the position is taken from.
Use the arrow keys to enter the design elevation.Note: If the "Here" soft key is not available, it means that a high accuracy position is not available. For more information, Refer to Operation and Maintenance Manual, "Troubleshooting Techniques".
Illustration 3 g01247536
Press "OK" in order to confirm the settings.The Design Name dialog appears:Refer to Illustration 3.Note: The AccuGrade System gives the design a default name.
If required, edit the default name, then press "OK" in order to accept the name and return to the "Select Design File" dialog.The design just created is highlighted.
Press "OK" in order to load the new level surface design, and return to the plan view guidance screen.
A level surface requires an elevation and a name. Creating a level surface generates a design file. The design file then needs to be loaded for the system to give machine guidance.In order to create and load a level surface in the field, complete the following steps:
Illustration 1 g01247562
Press "Design: <Name>" from any guidance view. The Select Design File dialog appears. Refer to Illustration 1.
Illustration 2 g01247528
Press "New Level". The New Design: Level Surface dialog appears. Refer to Illustration 2.
Do one of the following actions:
Press the "Here" soft key in order to use the current elevation at the guidance point that has focus.
After you press the "Here" soft key, you can still use the arrow keys to change the values.
One of the "Blade: Left" or "Blade: Right" soft keys appears in the Level Surface Design dialog. This ensures that you know which blade tip the position is taken from.
Use the arrow keys to enter the design elevation.Note: If the "Here" soft key is not available, it means that a high accuracy position is not available. For more information, Refer to Operation and Maintenance Manual, "Troubleshooting Techniques".
Illustration 3 g01247536
Press "OK" in order to confirm the settings.The Design Name dialog appears:Refer to Illustration 3.Note: The AccuGrade System gives the design a default name.
If required, edit the default name, then press "OK" in order to accept the name and return to the "Select Design File" dialog.The design just created is highlighted.
Press "OK" in order to load the new level surface design, and return to the plan view guidance screen.
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
3813749
HARNESS AS-HEATER & AIR COND
773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G
773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G