HARNESS AS-CAB 3193809 - Caterpillar

Manufacture Hose
Illustration 1 g01367902
(A) Manufactured hose (B) 780 15 mm (30.7 0.60 inch)
Manufacture hose (A) . Assemble one 124-2119 Permanent Coupling (1) and one 124-2136 Permanent Coupling (2) to 122-6881 Hydraulic Hose (3) .Manufacture the Tube
Remove 215-4370 Tube As (9) from the tank.
Illustration 2 g01369603
(4) 168-9756 Elbow (9) 215-4370 Tube As (C) 87 mm (3.4 inch) (D) 20.7 mm (0.81 inch) (E) 47 1.5 mm (1.8 0.059 inch)
Modify 215-4370 Tube As (9). Cut a 21.7 mm (0.85 inch) hole.
Position 168-9756 Elbow (4) to 215-4370 Tube As (9) and weld.
Illustration 3 g01369673
(F) Manufactured TubeNote: The manufactured tube must withstand 345 kPa (50 psi).Attach Manufactured Tube to Tank.
Illustration 4 g01368027
Attach manufactured tube (F) to the tank.Attach the Block
Illustration 5 g01368042
Attach one 175-0447 Check Valve As (6) to the 6G-2168 Block (5) .
Illustration 6 g01368061
Remove hose (8) in order to attach block (5). Install hose (8) to block (5) .Install Hose
Illustration 7 g01368063
Attach manufactured hose (A) to 175-0447 Check Valve As (6) .
Illustration 8 g01368083
Attach manufactured hose (A) to manufactured tube (F) .
Illustration 9 g01368075
Attach two 177-2215 Straps (7) .