HARNESS AS-ENGINE 3240695 - Caterpillar

can be downloaded from a USB drive if in PDF format.
Illustration 17 g06099084
Manuals screen with a document copied over from an inserted thumb drive
The following procedure is used to download a manual onto the CMD:
Insert a USB thumb drive with a manual into one of the USB ports on the rear of the display. The drive should not have any other files. The document must be in PDF format. The document will appear under "External Source" once the thumb drive is recognized.
Tap the document under "External Source" in order to select the file.
Tap the "< Copy <" soft button to move and download the document onto the CMD.
Illustration 18 g06099075
Manuals direct-access soft button
Remove the USB thumb drive and view the manuals through the "Direct Access" screen by pressing and holding down the "Home" button. Select the "Manuals" direct-access soft button. Refer to Illustration 4.
Illustration 19 g06099357
Viewing screen for manuals
The user can select, view, and navigate any loaded documents from the viewing screen for the manual. Refer to Illustration 19.ECM Select
Illustration 20 g06099370
ECM Select screen with dual engines on the display
(24) Source address and CAN connection for engines and transmissionsSelect engine and transmission source addresses and CAN connections (24) to allow the CMD to display correct information on the various screens. Each engine or transmission ECM is denoted by a source address (such as "sa0" or "sa1") and a CAN connection location (such as "cana" and "canb"). Source addresses are specific to the equipment manufacturer. Caterpillar marine engines are "sa0" for Starboard, "sa1" for port and "sa239" for center locations configured in the ECM.
Illustration 21 g06099373
Display reboot screen
Once proper selections have been made, the display automatically reboots and the engine and transmission parameters will be displayed.Engine Totals
Illustration 22 g03803680
Engine totals screen
(25) Clear trip informationThe engine totals screen provides information about the total engine operation values and the engine trip operation. Trip information is displayed in the top half of the "Engine Totals" field. Trip information can be reset to zero by tapping the "Clear Trip Averages" soft button (25) located in the upper right corner of the screen.Engine totals since the vessel was commissioned are displayed on the bottom half of the screen in the "Engine Totals" field. The engine totals cannot be changed. The port engine information is in the left column and starboard information is displayed in the right column.Display Shortcuts
The following provides information about shortcuts to access special information or quickly access certain functions.
Illustration 23 g03803948
(26) Features and settings shortcut screenSwipe up from the bottom of the screen to display the "Features and Settings" shortcut screen. The "Features and Settings" shortcut screen can be accessed from any other screen. Refer to Illustration 23.
Illustration 24 g03803957
Setting the wax pencils
(27) Wax pencil marks
(28) Wax pencil soft buttonRefer to Illustration 24. Tap the soft button for the desired mode to change the "Display Mode" between "Day", "Night", "Auto", or "Blackout". "Blackout" results in a black screen with nothing displayed. Tap the screen or any of the three buttons, "Home", "Acknowledge", or "Back" to exit the blackout display