HARNESS AS-CHASSIS 3256954 - Caterpillar

(1) Torque for bolts that fasten retainer to housing ... 50 7 N m (37 5 lb ft)(2) Torque for bolts that fasten turbine to hub assembly ... 120 15 N m (90 11 lb ft)(3) Torque for bolts that fasten flange assembly to housing ... 50 7 N m (37 5 lb ft)(4) Torque for bolts that fasten sleeve to impeller flange ... 120 15 N m (90 11 lb ft)(5) Torque for bolts that fasten retainer to support ... 50 7 N m (37 5 lb ft)(6) Diameter of new planet shaft ... 47.193 0.008 mm (1.8580 .0003 in)(7) Inside diameter of new planet gear ... 66.274 0.010 mm (2.6092 .0004 in)(8) Torque for nut that fastens turbine hub to flange assembly ... 985 35 N m (726 26 lb ft) Lubricate lock plate surface and threads before nut is tightened.(9) Outside diameter of new shaft (in bearing area) ... 69.837 0.013 mm (2.7495 .0005 in) Inside diameter of new bearings (after installation) ... 69.939 0.044 mm (2.7535 .0017 in)(10) Torque for bolts that fasten support to carrier ... 120 15 N m (90 11 lb ft)(11) Torque for bolt that fastens flange to shaft ... 220 25 N m (160 18 lb ft)