HARNESS AS-LIGHTING 3337782 - Caterpillar

(1) Torque for bolts that fasten retainer to support ... 37 2 lb. ft.(50 3 N m)(2) Torque for bolts that fasten support to carrier ... 80 4 lb. ft.(110 5 N m)(3) Torque for bolts that fasten sleeve to impeller flange ... 80 4 lb. ft.(110 5 N m)(4) Clearance between the stator and turbine: Across the diameter (new) ... .025 .006 in.(0.64 0.16 mm)Maximum permissible across the diameter ... .051 in.(1.30 mm)(5) Torque for bolts that fasten retainer to housing ... 37 2 lb. ft.(50 3 N m)(6) Torque for bolt that fastens flange to shaft ... 160 11 lb. ft.(220 15 N m)(7) Outside diameter of new shaft (in bearing area) ... 2.8632 .0006 in.(72.726 0.015 mm) Diameter inside new bearings ... 2.8692 .0026 in.(72.878 0.065 mm)(9) Clearance (new) between plate and wear sleeve (no adjustment) ... .031 .028 in.(0.79 0.71 mm) To check this clearance, the converter must be lifted and held by support (8) while it is measured.(10) Torque for bolts that hold flange assembly to housing ... 80 4 lb. ft.(110 5 N m)(11) Clearance between stator and impeller: Across the diameter (new) ... .032 .020 in.(0.82 0.50 mm)Maximum permissible across the diameter ... .071 in.(1.80 mm)(12) Torque for nut that fastens turbine hub to flange assembly ... 730 25 lb. ft.(985 35 N m) Lubricate lock plate surface and threads before nut is tightened.(13) Torque for bolts that fasten turbine to hub assembly ... 80 4 lb. ft.(110 5 N m)