HARNESS AS-SENSOR 3366018 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 2
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Install the truck body retaining cables. Operation and Maintenance Manual, "Cable (Truck Body Retaining)".
Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure Release".
Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Tank Oil - Change - Hoist and Brake System".
Illustration 1 g01990657
Disconnect hose assembly (1). Remove tube assemblies (2).
Illustration 2 g01990673
Disconnect hose assembly (3), hose assembly (4), and hose assemblies (5).
Illustration 3 g01990694
Disconnect harness assembly (6). Remove clip (7). Disconnect harness assembly (8).
Illustration 4 g01990755
Disconnect hose assembly (9) and hose assembly (10).
Illustration 5 g01990761
Attach Tooling (A) and a suitable lifting device onto hoist control valve (11). The weight of hoist control valve (11) is approximately 191 kg (420 lb).
Illustration 6 g01990775
Remove bolts (12) in order to remove hoist control valve (11). Installation Procedure
Install hoist control valve (11) in the reverse order.