HARNESS AS-SENSOR 3375187 - Caterpillar

Do not bend or strike high pressure lines. Do not install bent or damaged lines, tubes or hoses.Repair any loose or damaged fuel and oil lines, tubes and hoses. Leaks can cause fires.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Inspect all lines, tubes and hoses carefully. Do not use your bare hand to check for leaks. Tighten all connections to the recommended torque. Replace if any of the following conditions are found:1. End fittings damaged or leaking.2. Outer covering chafed or cut and wire reinforcing exposed.3. Outer covering ballooning locally.4. Evidence of kinking or crushing of the flexible part of hose.5. Armouring embedded in the outer cover.6. End fittings displaced.Make sure that all clamps, guards and heat shields are installed correctly to prevent vibration, rubbing against other parts, and excessive heat during operation.Shields, which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Always have a fire extinguisher on the machine and know how to use it. Inspect and have it serviced as recommended on its instruction plate.