HARNESS AS-MOTOR 3416247 - Caterpillar

Illustration 1 g00280775
9T-9021 Right Tilt Cylinder 9T-9022 Left Tilt Cylinder (1) Lubricate the threads of the cylinder rod with a minimal amount of the lubricant that is being sealed. Lubricate the face of the nut that contacts the flange of the piston. Torque for the nut ... 8000 800 N m (5900 590 lb ft) (2) Torque for the piston ... 800 80 N m (590 59 lb ft) (3) Bore of the new cylinder tube ... 266.70 .10 mm (10.500 0.004 inch) (4) Diameter of the new cylinder rod ... 139.650 .038 mm (5.4980 0.0015 inch) (5) Bore of the new cylinder head ... 139.98 .03 mm (5.511 0.001 inch) (6) Lubricate the sealing lips with a minimal amount of the lubricant that is being sealed. (7) Torque for the four bolts ... 28 7 N m (20 5 lb ft) (8) Torque for the six bolts ... 3100 350 N m (2300 260 lb ft) (9) Torque for the two bolts ... 3100 350 N m (2300 260 lb ft)Tilt Cylinder Drift
The maximum permissible tilt cylinder drift is 25 mm (1.0 inch) at the following conditions. Oil temperature of 38 to 49°C (100 to 120°F) ... 5 minutes Oil temperature of 49 to 66°C (120 to 150°F) ... 2.7 minutes Oil temperature above 66°C (150°F) ... 1.7 minutes